UNO +1.8''LCD Display +Sensor Shield V5 Module for Arduino Robot AVR
$18.61
Details UNO ATMEGA328P-PU:MicrocontrollerATmega328Operating Voltage5VInput Voltage (recommended)7-12VInput Voltage (limits)6-20VDigital I/O Pins14 (of which 6 provide PWM output)Analog Input Pins6DC Current per I/O Pin40 mADC Current for 3.3V Pin50 mAFlash Memory32 KB (ATmega328) of which..
Details
UNO ATMEGA328P-PU:
Microcontroller | ATmega328 |
Operating Voltage | 5V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limits) | 6-20V |
Digital I/O Pins | 14 (of which 6 provide PWM output) |
Analog Input Pins | 6 |
DC Current per I/O Pin | 40 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 32 KB (ATmega328) of which 0.5 KB used by bootloader |
SRAM | 2 KB (ATmega328) |
EEPROM | 1 KB (ATmega328) |
Clock Speed | 16 MHz |
SensorShield Module V5:
Features :
- -Ready to plug amp; play.
- It can connect to various modules like sensors, servos, relays, buttons,potentiometers
- Each functional module has buckled port with VCC,GND and Output, which has corresponding port on the Sensor Shield, connectedwith a plain 2.54mm dual-female cable you may start playing already. Buckledbrick cables are like cement for bricks, make the connections easier, secureand more professional looking.
1.8" Serial TFT LCD Display:
Features:
- Display Mode: 1.8" TFT SPI Interface, Transmissive, Normally white;
- Display Color: 262K colors;
- Backlight Type: LED
- Resolution: 128W * 160H Dots
- Board Size: 5.00 x 3.4cm
- View Area: 28.03W * 35.04H mm
- Dot Size: 0.06W * 3 * 0.18H mm
- Dot Pitch: 0.18W * 0.18H mm
- Viewing Angle: 6 o'clock
- SPI Bus interface
- IC Driver: ST7735R
- 5V/3.3V TTL logic Compatible, can be used in 5V/3.3V IO Arduino systemdirectly
Package List:
1x UNO ATMEGA328P-PU
1x SensorShield Module V5
1x 1.8" Serial TFT LCD Display
1x USB Cable